Product Compliance News

Digital Product Passport Examples: A Battery and a T-Shirt

Scan two e-bike battery labels and inspect a T-shirt evidence sheet. See which information belongs to a model, an individual unit or a garment batch.

Table of Contents

A digital product passport connects a physical product to a digital record. What the record describes matters. Two e-bike batteries can have identical specifications and different service histories. Two navy T-shirts can have the same style code and come from different fabric lots. Here are two fictional examples you can open and use to test your own supplier data.

Prepared by EcoComply. Regulatory sources checked 19 November 2026.

What does a battery passport look like when you scan it?

These two labels belong to separate City 360 e-bike batteries. Both records show a 36 V, 10 Ah lithium-ion pack with 360 Wh of nominal energy. The serial number identifies which pack you are holding. Download the two QR labels (PDF) and scan each one, or open the records below.

Try it with your factory. Ask someone who did not prepare the labels to scan both and read back the serial on screen. Then ask which pack had the repair. If both labels open a shared model sheet, a reviewer may see the right chemistry and still attribute the repair to the wrong battery. Check the serial-to-record mapping before approving a print run.

Does every e-bike battery of the same model need its own record?

From 18 February 2027, each qualifying light means of transport (LMT) battery placed on the EU market or put into service needs an individual passport. An e-bike traction pack that meets the LMT definition can be covered at 360 Wh. The threshold above 2 kWh applies to industrial batteries. Article 77 distinguishes shared model data from individual battery data. Battery categories in Article 3 and battery passport scope and identifiers in Article 77.

We made the fictional repair note visible so you can spot a swapped label. A production passport must give each audience access to the fields it is entitled to see. For example, Annex XIII places individual state-of-health data in the legitimate-interest group. These PDFs illustrate identity and record changes. A production system also needs the applicable fields, access controls and an update process. Article 78 and Annex XIII of the Batteries Regulation. Use the battery supplier checklist to brief your pack manufacturer.

What can a clothing brand show a retailer today?

Imagine a buyer asks for a passport for the navy Everyday Tee, style CT-01, batch N07. Your sourcing lead has three different answers, each backed by a different level of evidence.

  • The main fabric is 100% cotton. The specification for fabric C17 matches the bill of materials for CT-01. This entry describes the main fabric.
  • Batch N07 was cut and sewn in Portugal. The sewing factory confirms both operations. The dyeing location is still open. A sewing declaration only covers the stage it documents.
  • The recycled percentage is unverified. The mill supplied a range brochure. It does not identify the fabric delivered for N07. Leave the percentage blank, mark it unverified and request evidence tied to that delivery. Entering zero would make a different claim.

A reply the buyer can use. “We can confirm the main fabric and sewing location for CT-01, batch N07. We’re checking the dyeing location and recycled-content evidence with the mill. Which fields do you need for this order, and which will shoppers see?” The worked T-shirt sheet shows the source and next action for each field.

This is a retailer pilot. The European Commission says a future delegated act will set apparel-specific DPP requirements. Its working plan gives 2027 as the indicative year for adopting the measure. A retailer can give you a contractual delivery date now. Track that date separately from the eventual EU application date. Commission guidance on textile apparel and ESPR Working Plan 2025–2030.

What should a founder check before scaling a pilot?

Ask a colleague to answer two questions from the records alone. Which physical product does this entry describe? For the repair, the answer is one battery serial. For the sewing declaration, it is the garment batch. Which document supports this particular claim? The pack specification supports the shared electrical ratings. The factory declaration supports the sewing location. A claim without a matching source stays open.

Run the check again when something changes. If the next batch uses a new mill, reopen the affected material claims. If a technician services one battery, update that unit. This gives operations a practical acceptance test before ordering thousands of labels or promising a buyer a delivery date.

If your factory has a label deadline, bring the pack specification, two serials and the print date to a battery passport pilot review. If a buyer has requested garment data, bring its field list and one style to a textile passport assessment. You can also browse the digital product passport resource hub.

Frequently Asked Questions

Everything you need to know about EU compliance

Can identical battery packs share a single passport?

Each in-scope battery needs its own electronic record and unique identifier. Identical packs can share model-level evidence. Keep the individual identifier and the relevant history associated with each unit.

What can I send a retailer while a supplier certificate is missing?

Send the verified fields for the named garment and a list of open requests. For each gap, identify the supplier, the evidence requested and the next update date. Leave the associated claim unverified until you have evidence covering that product and batch.

See a completed T-shirt evidence sheet showing how to flag an unverified recycled-content claim.

Discuss your product and compliance needs

Tell us about your product and target markets. Receive an initial requirements assessment and a personalised proposal based on our fixed pricing. No obligation.

The EcoComply compliance platform dashboard